Manualshelf

User's Manual

ManualsBrandsMotorola Solutions ManualsElectronicsDistributed I/O System
11121314151617181920
Installation
Installation of an Internal Battrey
Release the screw at the top of the battery chamber door, and
slide the door out, as shown in Figure 10.
Connect the 9V battery cable (FKN8204A) to the DC power
input connector on the back of the unit.
Connect the 9V DC battery to the cable.
Place the 9V DC alkaline battery in the chamber as shown in
Figure 10.
Close the battery chamber door and secure with the screw.
Screw Battery
Chamber Door
Battery
Chamber
Battery
Figure 10
PIU Battery Chamber
14