User's Manual

Installation
Mounting the PIU Using a Bracket
Using four M3x6 or M3x8 screws, attach a bracket (not
supplied) to the back of the PIU. The upper two bracket holes
must be 81 mm (3.19”) apart, and the lower two bracket holes
must be 61 mm (2.40”) apart and 54 mm (2.13”) below the
upper holes, as shown in Figure 6.
Attach the bracket to the mounting surface.
2.13"
54mm
2.40"
61 mm
3.19"
81mm
Figure 6
PIU Installation– Bracket Mount dimension
10