User's Manual

Installation

Before installing the PIU, verify that there is sufficient space

around the unit according to the specific installation.

Mounting the PIU On A Wall Using Screws

Secure two screws (not supplied) of maximum 0.37” (9.5 mm)

head size to the wall, 3.256” (82.7 mm) apart. The wall-

mounting template in Appendix D can be used to determine the

space between both screws.

The screws must not protrude from the wall surface by more

than 0.23” (6 mm) or by less than 0.16” (4 mm).

Attach the unit to the wall, fitting the two shaped cavities on

the back cover of the unit over the screws and sliding it down.

(See Figure 5.)

3.26"

82.7 mm

1.19"

30.3mm

Figure 5

PIU Installation– Screw Mount dimensions