User's Manual

Installation
18
!
C a u t i o n
To ensure that moisture does not damage the
transmitter, gel cups must be used to seal the
connection between the data wires and the
meter.
12. Replace the lid on the pit with the antenna cover facing
up.
!
C a u t i o n
The plastic bracket can withstand the weight of
the lid (up to 330lb/ 150 kg). Care should be
taken not to exert more than this weight or else
the bracket might break.
Connections
Data Connection
Two data input wires from the transmitter are connected to
the meter, one to each side of the switch.
Programming Connection
The two data wires of the transmitter can be connected to
the programmer unit for enabling, programming and
testing the transmitter using the AMR ToolBox. Connect
the black wire on the programming cable to the black wire
on the transmitter and the green wire to the green.