User's Manual

Installation
10
2. Connect the transmitter to the programmer unit as
shown in Figure 11 in Appendix C.
3. Using the AMR ToolBox, change the required
parameters (as described in Appendix C and the AMR
ToolBox User Guide.)
4. Reconnect the transmitter to the meter and read the
meter reading (from the display of the meter).
5. Force a transmission with a magnet (as described in
Appendix C) and read the counter value (using the
AMR ToolBox attached to the programmer unit,
Viewer tool in the concentrator or the Host
application.)
6. Send the two meter readings and the counter value to
the Host (e.g. by phone, in person) where they can be
synchronized for billing.