User's Manual
Table Of Contents
- ASTRO XTS 2500 Digital Portable Radio Model I User Guide
- Product Safety and RF Exposure Compliance
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Contents
- General Radio Operation
- Notations Used in This Manual
- XTS 2500 Model I Radio
- Physical Features of the XTS 2500 Model I Radio
- Programmable Features
- LED Indicators
- Alert Tones
- Standard Accessories
- Universal Connector Cover
- Remote Speaker Microphone Adapter
- Radio On and Off
- Zones and Channels
- Receive / Transmit
- Conventional Mode Operation
- Common Radio Features
- Special Radio Features
- Helpful Tips
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty
- Index
28
Common Radio Features
Scan
The scan feature allows you to monitor traffic on different channels by
scanning a preprogrammed list of channels. The list must be
preprogrammed by a qualified technician.
Turn Scan On and Off
Use the Preprogrammed Scan On/Off Switch
Delete a Nuisance Channel
When the radio scans to a channel that you do not wish to hear
(nuisance channel), you can temporarily delete the channel from the
scan list.
Place the Scan On/Off
Switch in the “scan on” or
“scan off” position.
1 When the radio is locked
onto the channel to be
deleted, press the
preprogrammed Nuisance
Delete button.
Repeat this step to delete
more channels.
Note: You cannot delete priority
channels or the
designated transmit
channel.
2 The radio continues
scanning the remaining
channels in the list. To
resume scanning the deleted
channel, change channels or
turn scan off and then back
on again.