User's Manual
Table Of Contents
- Contents
- General Radio Operation
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Operation
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Scan
- Telephone Calls (Trunking Only)
- Private Calls (Trunking Only)
- Selective Calls (ASTRO Conventional Only)
- Call Alert Paging
- Conventional Talkgroup Calls (Conventional Operation Only)
- Status Calls (ASTRO 25 Trunking Only)
- Repeater or Direct Operation
- Smart PTT (Conventional Only)
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
48
Common Radio Features
Change the Scan List Status Only
T = this channel is in the scan list as a non-priority channel.
S = this channel is in the scan list as the priority 2 channel.
S (dot flashing) = this channel is in the scan list as the priority 1
channel. You will hear all traffic on the priority 1 channel,
regardless of traffic on non-priority channels.
no icon = this channel is deleted from the scan list.
Note: You cannot delete a priority channel from a scan list. In a
talkgroup scan list, priority cannot be assigned.
5 Press V or U to select
more channels to be added or
deleted.
OR
Use the keypad to go directly
to additional channels to be
added or deleted.
OR
Use the 16-Position Select
knob to select additional
channels to be added or
deleted.
6 Move the Scan List
Programming switch out of
the Programming position.
1 Move the Scan List
Programming switch to the
Programming position. You
see the first list member.
p (flashing) indicates the
programming mode.
FIRE DISP NW p