User's Manual

Advanced Two-Way
27
PRELIMINARY
Channel Scanning
By using SCAN, you can monitor channels and codes for transmissions
and lock in on the one that interests you.You don’t have to set a new
channel or code, the radio just resets itself temporarily to that channel
and code and you can start talking. However, if no transmissions take
place for five seconds, scanning resumes.
After you turn on
SCAN, your radio scans channels and codes until it finds an active
one and locks on to it. If you do not begin talking or no one else transmits within a
short time, it will resume scanning.
If you want to scan channel frequencies without interference eliminator codes,
change your code to
0.
Turning on Channel Scanning
To set channel scanning, select the
TWO WAY mode and the SET SCAN menu. Yo u r
channel/code screen displays
h and scrolls through channels when scanning is turned
on.