User's Manual

Getting Started

PRELIMINARY

• Turn off the radio (see page 12) or place the NiMH battery in the charger

adapter cover.

• Plug in the charger.

• At the contacts on the back of the radio, or if charging just the battery, at the

battery contacts:

• Position the charger with the hook on the LED end of the charger placed over

the larger slot.

• Snap the hook on the cord end into the smaller slot.

Note: If you notice the LED flashing red for more than a minute while clamping the

charger onto the charger adapter cover, the battery is faulty and must be

replaced.

• When the LED turns solid green, the battery is fully charged.

Note: When charging the battery by itself, remove the charger from the charger

adapter cover before removing the battery.