Installation Guide
Table Of Contents
- MOSCAD-M Remote Terminal Unit
- CONTENTS
- INTRODUCTION
- INSTALLATION
- THE MOSCAD˚M UNIT
- POWER MANAGEMENT
- ETHERNET INTERFACE OPTION
- APPENDIX A: CABLES AND ADAPTERS
- APPENDIX B: MODELS AND ACCESSORIES
- APPENDIX C: CHANGING THE ANALOG INPUT MEASUREMENT TYPE
The MOSCAD-M Unit
20
User Page LED Functions
The following table describes the functions of the diagnostic LEDs when set to the User
(Page 5) toggle or display (CPU and IO2 LEDs on). The LEDs are controlled by the user ‘C’
Application.
Name On/Off Function/Indication
CPU On
IO1 Off
IO2 On
IO3 Off
LED 1 On User Controlled
LED 2 On User Controlled
LED 3 On User Controlled
LED 5 On User Controlled
LED 6 On User Controlled
LED 7 On User Controlled
LED 9 On User Controlled
LED 10 On User Controlled
LED 11 On User Controlled
LED 13 On User Controlled
LED 14 On User Controlled
LED 15 On User Controlled
LED 16 On User Controlled
The user may choose to define the functions of the diagnostic LEDs in an application program.
The display returns from a user-defined toggle to the CPU toggle when the push-button is
pressed or as a result of a ‘C’ command. (See ‘C’ Toolkit for MOSCAD Family RTUs
manual.)