Installation Guide

The MOSCAD-M Unit
15
Name On/Off Function/Indication
LED 13
MON
On Controlled by application for user use.
LED 2
RST
On The CPU is in Reset mode.
LED 3
ERR
On An error has occurred.
LED 4
BATT
On The backup battery does not exist or has reached
a critical level of 3.5V.
LED 6
TX1
On The RTU is transmitting data via Port 1.
LED 7
RX1
On The RTU is receiving data via Port 1.
LED 8
CM1
On The communication channel used by Port 1 is
busy.
LED 10
TX2
On The RTU is transmitting data via Port 2.
LED 11
RX2
On The RTU is receiving data via Port 2.
LED 12
CM2
On The communication channel used by Port 2 is
busy.
LED 14
TX3
On The RTU is transmitting data via Port 3.
LED 15
RX3
On The RTU is receiving data via Port 3.
LED 16
CM3
On The communication channel used by Port 3 is
busy.