Users Manual

7.6.13.8
Exiting Emergency Mode
This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when:
• An acknowledgment is received (for Emergency Alarm
only).
• All retries to send the alarm have been exhausted.
• Your radio is turned off.
NOTE:
Your radio does not reinitiate the Emergency mode
automatically when it is powered up again.
Follow the procedure to exit Emergency mode on your
radio.
Do one of the following:
• Press the programmed Emergency Off button.
• Turn off the radio and then, power it on again,
if your radio has been programmed to remain
on the Emergency Revert channel even after
acknowledgment is received.
• Change the channel to a new channel that has no
emergency system configured.
7.6.14
Man Down
NOTE:
Man Down feature is applicable to only XPR
7350e/XPR 7380e .
This feature prompts an emergency to be raised if there
is a change in the motion of the radio, such as the tilt of
the radio, motion and/or the lack of motion for a predefined
time.
Following a change in the motion of the radio for a
programmed duration, the radio pre-warns the user with
an audio indicator indicating that a change in motion is
detected.
If there is still no acknowledgment by the user before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm or an Emergency Call. You can program
the reminder timer by using CPS.
English
168