Declaration of Conformity

English
302
6.3.18.1
Turning Man Down Alarms On and Off
NOTE:
The programmed Man Down button and Man Down
settings are configured using CPS. Check with your
dealer or system administrator to determine how
your radio has been programmed.
If you enable Man Down to maximum sensitivity and
set Vibrate Style to high, the radio automatically
restricts Vibrate Style to medium. This function
prevents high Vibrate Style from initiating the Man
Down emergency feature.
The procedure for turning the Man Down Alarms On
and Off depends on how your radio is programmed. If
programmed with a Man Down Alarms On/Off button, use
the button to toggle the Man Down Alarms On and Off. This
applies to all of the Man Down Alarms enabled for your
radio.
When using the programmable button to toggle the Man
Down Alarms On, your radio plays a tone that rises in pitch
and displays a brief confirmation message.
In order to hear the tones described above when turning
the Man Down Alarms On and Off, the MOTOTRBO radio
and Connect Plus Option Board must both be enabled for
keypad tones.
If your radio has been programmed so that Man Down
Alarms can be turned On and Off using the menu, perform
the following procedure.
1
Press to access the menu.
2
Press or to Utilities and press to
select.
3
Press or to Connect Plus and press
to select.
4
Press or to Man Down Alarm and press
to select.
If Man Down Alarm is currently disabled, the Enable
option is shown.
If Man Down Alarm is currently enabled, the
Disable option is shown.