Users Manual
Table Of Contents
- Utilities
- 8.1 Keypad Lock Options
- 8.2 Squelch Levels
- 8.3 Power Levels
- 8.4 Adjusting Display Brightness
- 8.5 Voice Operating Transmission
- 8.6 Setting Display Backlight Timer
- 8.7 Turning Radio Tones/Alerts On or Off
- 8.8 Turning Power Up Tone On or Off
- 8.9 Setting Tones/Alerts Volume Offset Levels
- 8.10 Turning Talk Permit Tone On or Off
- 8.11 Setting Languages
- 8.12 Turning LED Indicators On or Off
- 8.13 Turning Introduction Screen On or Off
- 8.14 Turning Voice Announcement On or Off
- 8.15 Turning Automatic Call Forwarding On or Off
- 8.16 Setting Menu Timer
- 8.17 Turning Analog Microphone AGC On or Off
- 8.18 Turning Digital Microphone AGC On or Off
- 8.19 Turning Intelligent Audio On or Off
- 8.20 Turning Acoustic Feedback Suppressor On or Off
- 8.21 General Radio Information
- 8.22 Received Signal Strength Indicator
- 8.23 Front Panel Programming
- 8.24 Viewing Enterprise Wi-Fi Certificate Details
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
8.12
Turning LED Indicators On or Off
Follow the procedure to turn the LED indicators on or off on
your radio.
1
Press to access the menu.
2
Press or to Utilities. Press to
select.
3
Press or to Radio Settings. Press
to select.
4
Press
or to LED Indicator. Press
to select.
5
Press to enable or disable the LED indicator.
The display shows one of the following results:
• If enabled, appears beside Enabled.
• If disabled, disappears beside Enabled.
8.13
Turning Introduction Screen On or
Off
You can enable and disable the Introduction Screen by
following the procedure.
1
Press to access the menu.
2
Press or to Utilities. Press to
select.
3
Press or to Radio Settings. Press
to select.
4
Press or to Display. Press to
select.
English
123