Users Manual

• If the program update is unsuccessful, a tone sounds,
the red LED blinks once, and the display shows Sw
Update Failed.
NOTE:
If the programming update is unsuccessful, the
software update failure indications appear every
time you turn on your radio. Contact your dealer
to reprogram your radio with the latest software to
eliminate the software update failure indications.
See Checking Software Update Information on page 131
for the updated software version.
7.25
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-
Fi network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTE:
This feature is applicable to XPR 3500e Bluetooth
and Wi-Fi models only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
WPA/WPA2-Enterprise Wi-Fi network
Uses certificate-based authentication.
Your radio must be pre-configured with a certificate.
NOTE:
Check with your dealer or system administrator
to connect to WPA/WPA2-Enterprise Wi-Fi
network.
The programmed Wi-Fi On or Off button is assigned by
default. Check with your dealer or system administrator to
determine how your radio has been programmed.
Voice Announcements for the programmed Wi-Fi On or
Off button can be customized through CPS according
English
108