Users Manual

ARTS-equipped radios transmit or receive signals
periodically to confirm that they are within range of each
other.
Your radio provides indications of states as follows:
First-Time Alert
A tone sounds.
The display shows channel alias and In Range.
ARTS-in-Range Alert
A tone sounds, if programmed.
The display shows channel alias and In Range.
ARTS-Out-of-Range Alert
A tone sounds. The red LED rapidly blinks.
The display shows Out of Range alternating with the
Home screen.
NOTE:
Check with your dealer or system administrator for
more information.
7.24
Over-the-Air Programming
Your dealer can remotely update your radio through
Over-the-Air Programming (OTAP) without any physical
connection. Additionally, some settings can also be
configured by using OTAP.
When your radio undergoes OTAP, the green LED blinks.
When your radio receives high volume data:
•
The display shows the High Volume Data
icon.
• The channel becomes busy.
• A negative tone sounds if you press the PTT button.
When OTAP completes, depending on the configuration:
• A tone sounds. The display shows Updating
Restarting. Your radio restarts by powering off and on
again.
• You can select Restart Now or Postpone. When you
select Postpone, your radio returns to the previous
screen. The display shows the OTAP Delay Timer icon
until the automatic restart occurs.
When your radio powers up after automatic restart:
• If successful, the display shows Sw Update
Completed.
English
107