Users Manual
Table Of Contents
- Utilities
- 8.1 Keypad Lock Options
- 8.2 Squelch Levels
- 8.3 Power Levels
- 8.4 Adjusting Display Brightness
- 8.5 Voice Operating Transmission
- 8.6 Setting Display Backlight Timer
- 8.7 Turning Radio Tones/Alerts On or Off
- 8.8 Turning Power Up Tone On or Off
- 8.9 Setting Tones/Alerts Volume Offset Levels
- 8.10 Turning Talk Permit Tone On or Off
- 8.11 Setting Languages
- 8.12 Turning LED Indicators On or Off
- 8.13 Turning Introduction Screen On or Off
- 8.14 Turning Voice Announcement On or Off
- 8.15 Turning Automatic Call Forwarding On or Off
- 8.16 Setting Menu Timer
- 8.17 Turning Analog Microphone AGC On or Off
- 8.18 Turning Digital Microphone AGC On or Off
- 8.19 Turning Intelligent Audio On or Off
- 8.20 Turning Acoustic Feedback Suppressor On or Off
- 8.21 General Radio Information
- 8.22 Received Signal Strength Indicator
- 8.23 Front Panel Programming
- 8.24 Viewing Enterprise Wi-Fi Certificate Details
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
The display shows the Notification icon when the
Notification list has one or more events.
The list supports a maximum of 40 unread events. When
the list is full, the next event automatically replaces the
oldest event. After the events are read, they are removed
from the Notification list.
For text messages, missed calls, and call alert events, the
maximum number of notifications are 30 text messages
and 10 missed calls or call alerts. This maximum number
depends on individual feature (job tickets or text messages
or missed calls or call alerts) list capability.
NOTE:
Your radio suspends Scan when the Notification list
is displayed. Scanning resumes when your radio
exits the Notification list. Press , or wait for
the menu timer to expire to exit the Notification list.
7.22.1
Accessing Notification List
Follow the procedure to access the Notification list on your
radio.
1 Do one of the following:
• Press the programmed Notification button. Skip
the steps below.
• Press to access the menu.
2
Press to access the menu.
3
Press or to Notification. Press
to select.
4
Press or to the required event. Press
to select.
Long press to return to the Home screen.
7.23
Auto-Range Transponder System
The Auto-Range Transponder System (ARTS) is an
analog-only feature designed to inform you when your radio
is out-of-range of other ARTS-equipped radios.
English
106