Users Manual

If the Emergency Alarm request fails, the radio does not
retry to send the request, and enters the hot mic state
directly.
NOTE:
Some accessories may not support hot mic. Check
with your dealer or system administrator for more
information.
7.16.4
Sending Emergency Alarms with Voice
to Follow
1 Press the programmed Emergency On button.
You see one of these results:
•
The display shows Tx Alarm and the destination
alias.
The green LED lights up. The Emergency icon
appears.
2
Once the display shows Alarm Sent, speak clearly
into the microphone.
The radio automatically stops transmitting when:
• The cycling duration between hot mic and
receiving calls expires, if Emergency Cycle Mode
is enabled.
• The
hot mic duration expires, if Emergency Cycle
Mode is disabled.
The red LED blinks. The radio remains in
Emergency mode.
3 Press the Emergency Off button to exit the
Emergency mode.
The radio returns to the Home screen.
7.16.5
Receiving Emergency Alarms
When you receive an Emergency Alarm:
• A tone sounds.
•
The red LED blinks.
• The display shows the Emergency icon, and the
Emergency caller alias or if there is more than one
English
93