Users Manual

If unsuccessful after all retries have been exhausted:
• A tone sounds.
•
The display shows Alarm Failed.
The radio exits the Emergency Alarm mode and
returns to the Home screen.
7.16.2
Sending Emergency Alarms with Call
This feature allows you to send an Emergency Alarm
with Call to a group of radios. Upon acknowledgement
by a radio within the group, the group of radios can
communicate over a programmed Emergency channel.
Follow the procedure to send Emergency Alarms with call
on your radio.
1 Press the programmed Emergency On button.
You see the following:
• The display shows Tx Telegram and the
destination alias.
The green LED lights up. The Emergency icon
appears.
NOTE:
If programmed, the Emergency Search tone
sounds. This tone is muted when the
radio transmits or receives voice, and stops
when the radio exits Emergency mode.
The
Emergency Search tone can be programmed
by your dealer or system administrator.
2 Wait for acknowledgment.
If successful:
• The Emergency tone sounds.
•
The red LED blinks.
• The display shows Alarm Sent.
• Your radio enters the Emergency call mode when
the display shows Emergency and the destination
group alias.
3 Press the PTT button to make the call.
The green LED lights up. The display shows the
Group Call
icon.
4 Do one of the following:
English
91