User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- 7.1 Talkaround
- 7.2 Monitor Feature
- 7.3 Home Channel Reminder
- 7.4 Remote Monitor
- 7.5 Bluetooth®
- 7.5.1 Turning Bluetooth On and Off
- 7.5.2 Connecting to Bluetooth Devices
- 7.5.3 Connecting to Bluetooth Devices in Discoverable Mode
- 7.5.4 Disconnecting from Bluetooth Devices
- 7.5.5 Switching Audio Route between Internal Radio Speaker and Bluetooth Device
- 7.5.6 Viewing Device Details
- 7.5.7 Deleting Device Name
- 7.5.8 Adjusting Bluetooth Mic Gain Values
- 7.5.9 Permanent Bluetooth Discoverable Mode
- 7.6 Radio Check
- 7.7 Scan Lists
- 7.8 Scan
- 7.9 Vote Scan
- 7.10 Contacts Settings
- 7.11 Call Indicator Settings
- 7.11.1 Activating or Deactivating Call Ringers for Call Alerts
- 7.11.2 Activating or Deactivating Call Ringers for Private Calls
- 7.11.3 Activating or Deactivating Call Ringers for Selective Calls
- 7.11.4 Activating or Deactivating Call Ringers for Text Messages
- 7.11.5 Assigning Ring Styles
- 7.11.6 Selecting a Ring Alert Type
- 7.11.7 Configuring Vibrate Style
- 7.11.8 Alarm Tone Volume Escalation
- 7.12 Dynamic Caller Alias
Channels with this feature enabled can be added to a
particular roam list. The radio searches the channels in the
roam list during the automatic roam operation to locate the
best site. A roam list supports a maximum of 16 channels,
including the selected channel.
NOTE:
You cannot manually add or delete an entry in the
roam list. Contact your dealer for more information.
3.5
Capacity Plus–Single-Site
Capacity Plus–Single-Site is a single-site trunking
configuration of the MOTOTRBO radio system, which uses
a pool of channels to support hundreds of users and up
to 254 Groups. This feature allows your radio to efficiently
utilize the available number of programmed channels while
in Repeater Mode.
You hear a negative indicator tone if you try to access
a feature not applicable to Capacity Plus–Single-Site by
using a programmable button press.
Your radio also has features that are available in
conventional digital mode, IP Site Connect, and Capacity
Plus. However, the minor differences in the way each
feature works does not affect the performance of your
radio.
Check with your dealer or system administrator for more
information on this configuration.
3.6
Capacity Plus–Multi-Site
Capacity Plus–Multi-Site is a multi-channel trunking
configuration of the MOTOTRBO radio system, combining
the best of both Capacity Plus and IP Site Connect
configurations.
Capacity Plus–Multi-Site allows your radio to extend
trunking communication beyond the reach of a single
site, by connecting to different available sites which are
connected with an IP network. It also provides an increase
in capacity by efficiently utilizing the combined available
number of programmed channels supported by each of the
available sites.
When the radio moves out of range from one site and into
the range of another, it connects to the repeater of the new
site to send or receive calls/data transmissions. Depending
on your settings, this is done automatically or manually.
If the radio is set to do this automatically, it scans through
all available sites when the signal from the current site is
English
33