User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
• The yellow LED lights up.
If the monitored channel is free, you hear a “white
noise".
2 Press the PTT button to talk. Release the PTT
button to listen.
7.2.2
Permanent Monitor
The Permanent Monitor feature is used to continuously
monitor a selected channel for activity.
7.2.2.1
Turning Permanent Monitor On or Off
Follow the procedure to turn Permanent Monitor on or off
on your radio.
Press the programmed Permanent Monitor
button.
When the radio enters the mode:
• An alert tone sounds.
• The yellow LED lights up.
When the radio exits the mode:
• An alert tone sounds.
• The yellow LED turns off.
7.3
Home Channel Reminder
This feature provides a reminder when the radio is not set
to the home channel for a period of time.
If this feature is enabled through CPS, when your radio
is not set to the home channel for a period of time, the
following occurs periodically:
•
The Home Channel Reminder tone and announcement
sound.
You can respond to the reminder by performing one of the
following actions:
• Return to the home channel.
• Mute the reminder temporarily using the programmable
button.
• Set a new home channel using the programmable
button.
English
46