User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
Advanced Features
This chapter explains the operations of the features
available in your radio.
Your dealer or system administrator may have customized
your radio for your specific needs.
Check with your dealer
or system administrator for more information.
7.1
Talkaround
This feature allows you to continue communicating when
your repeater is non-operational, or when your radio is out
of range from the repeater but within the talk range of other
radios.
The talkaround setting is retained even after powering
down.
7.1.1
Toggling Between Repeater and
Talkaround Modes
Follow the procedure to toggle between Repeater and
Talkaround modes on your radio.
Press the programmed Repeater/Talkaround
button.
One of the following tones sounds:
Positive Indicator Tone
Radio is in talkaround mode.
Negative Indicator Tone
Radio is in repeater mode.
7.2
Monitor Feature
The feature allows you to remotely activate the microphone
of a target radio. You can use this feature to monitor any
audible activity surrounding the target radio.
7.2.1
Monitoring Channels
Follow the procedure to monitor channels.
1 Long press the programmed Monitor button.
If the channel is in use:
•
You hear radio activity or total silence.
English
45