User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
• Select a channel with the active group alias or ID.
•
Press the programmed One Touch Access
button.
3 Press the PTT button to make the call.
The green LED lights up.
4 Do one of the following:
•
Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
6.8.2
Responding to OVCM Calls
When you receive an OVCM Call:
•
The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
NOTE:
Recipient users are not allowed to Talkback during
a Broadcast Call. If the PTT button is pressed
during a Broadcast Call, the Talkback Prohibit Tone
sounds momentarily.
1 Do one of the following:
•
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
• If the Voice Interrupt feature is enabled, press
the PTT button to interrupt the audio from the
transmitting radio and free the channel for you to
respond.
The green LED lights up.
2 Do one of the following:
•
Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
English
43