User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
Zone and Channel
Selections
This chapter explains the operations to select a zone or
channel on your radio. A zone is a group of channels.
Your radio supports up to
16 channels and 1 zones, with a
maximum of 16 channels per zone.
Each channel can be programmed with different features
and/or support different groups of users.
5.1
Selecting Zones
Follow the procedure to select the required zone on your
radio.
Press the programmed Zone Toggle button.
One of the following tone sounds:
Positive Indicator Tone
Radio is in Zone 2.
Negative Indicator Tone
Radio is in Zone 1.
NOTE:
For all Non-keypad radio, you
are recommended to enable Voice
Announcement feature for selecting zone.
The Voice Announcement feature can only
be enabled through CPS.
5.2
Selecting Channels
Follow the procedure to select the required channel on your
radio.
Turn the Channel Selector Knob to select the
channel, subscriber ID, or group ID
once the
required zone is displayed (if you have multiple
zones in your radio).
English
33