User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
3 Secure the dust cover to the radio by pushing the
latch upwards.
2.6
Attaching the Accessory Connector
The accessory connector is to be secured to the universal
connector on the antenna side of the radio. Follow the
procedure to attach the accessory connector to your radio.
1 Insert the slanted end into the slots above the
universal connector.
2 Push connector upward.
3 Press downwards on the accessory connector until
you hear a click.
1
2
3
2.7
Turning the Radio On
Rotate the On/Off/Volume Control knob clockwise
until it clicks.
If successful, your radio shows the following indications:
• A tone sounds.
NOTE:
If the Tones/Alerts function is disabled, there is
no tone upon powering up.
• The green LED lights up.
English
22