User's Guide

Deleting Nuisance Channels
If a channel continually generates unwanted calls or noise,
(termed a "nuisance" channel), you can temporarily remove
the unwanted channel from the scan list. This capability
does not apply to the channel designated as the Selected
Channel. Follow the procedure to delete nuisance channels
on your radio.
1 When your radio locks on to an unwanted or
nuisance channel, press the programmed Nuisance
Channel Delete button until you hear a tone.
2 Release the programmed Nuisance Channel
Delete button.
The nuisance channel is deleted.
Restoring Nuisance Channels
Follow the procedure to restore nuisance channels on your
radio.
Do one of the following:
• Turn the radio off and then power it on again.
• Stop and restart a scan using the programmed
Scan button.
• Change the channel using the Channel Selector
Knob.
Call Indicator Settings
This feature allows you to configure call or text message
ringing tones.
Call Alert Operation
Call Alert paging enables you to alert a specific radio user
to call you back.
Responding to Call Alerts
When you receive a Call Alert:
• A repetitive tone sounds.
• The yellow LED blinks.
Press the PTT button within 4 seconds of receiving a
Call Alert page to respond with a Private Call.
English
34