User's Guide

Removing the Belt Clip
1 To remove the clip, press the belt clip tab away from
the battery.
2 Slide the clip upwards and away from the radio.
Turning the Radio On
Rotate the On/Off/Volume Control knob clockwise
until it clicks.
If successful, your radio shows the following indications:
• A tone sounds.
NOTICE:
If the Tones/Alerts function is disabled, there is
no tone upon powering up.
• The green LED lights up.
If your radio does not power up, check your battery. Make
sure that the battery is charged and properly attached.
Contact your dealer if your radio still does not power up.
Adjusting the Volume
To adjust the volume of your radio, perform one of
the following actions:
• To increase the volume, turn the On/Off/Volume
Control knob clockwise.
• To decrease the volume, turn the On/Off/Volume
Control knob counterclockwise.
English
17