User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Consignes de sécurité importantes
- Version logicielle
- Computer Software Copyrights
- Handling Precautions
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
Monitoring Features
Monitoring a Channel
Use the Monitor feature to make sure a channel is
clear before transmitting.
1 Press and hold the programmed Monitor button
and listen for activity.
The LED lights up solid yellow. You hear radio
activity or total silence, depending on how your
radio is programmed. This indicates that the
channel is in use.
2
Wait until you hear “white noise”. This indicates
that the channel is free.
3 Press the PTT button to talk and release it to
listen.
Permanent Monitor
Use the Permanent Monitor feature to continuously
monitor a selected channel for activity.
1 Press the programmed Permanent Monitor
button to activate permanent monitoring of the
channel.
Radio sounds an alert tone, the LED lights up solid
yellow.
2 Press the programmed Permanent Monitor
button to exit Permanent Monitor mode.
Radio sounds an alert tone, the LED turns off.
Making and Receiving Calls
30
English