User Manual

Making and Receiving Calls
Selecting a Zone
A zone is a group of channels. Your radio supports up
to 99 channels and 2 zones
.
Press the programmed Zone Toggle button to
select Zone 1 or Zone 2.
Selecting a Channel
Transmissions are sent and received on a channel.
Depending on your radio’s configuration, each
channel may have been programmed differently to
support different groups of users or supplied with
different features.
When the display is off and you push the Channel
Rocker, the display shows the current channel and
plays the channel announcement voice message.
When the display is on and you push the Channel
Rocker to the target channel, the display shows the
target channel and plays the channel announcement
voice message.
Push the Channel Rocker to select the channel.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID, or group ID is set,
you can proceed to receive and respond to calls.
The LED lights up solid
green while the radio is
transmitting and blinks green when the radio is
receiving.
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio
must be configured as part of that group.
LED blinks green. Your radio unmutes and the
incoming call sounds through the radio's speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
•
If the Channel Free Indication feature is
enabled, you hear a short alert tone the
moment the transmitting radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond.
Making and Receiving Calls
24
English