User's Manual

PROGRAMMING
FEATURES
English
45
Editing Scan List
Scan Lists can be edited by using the CPS
(refer to CPS section on page 46)
Nuisance Channel Delete
Nuisance Channel Delete allows you to
temporarily remove channels from the Scan
List. This feature is useful when frequent,
irrelevant conversations on a channel tie up
the scanning feature, becoming a nuisance
to the user.
To delete a channel from the Scan List:
• To start scanning, press the SBx (x=1 or
2) button (Scan has to be programmed to
either SB1 or SB2 via CPS). SB2 default
is Scan/Nuisance delete,
•
Wait until the radio stops on the channel
you wish to eliminate, then long press the
SBx button to delete it.
•
The channel will not be scanned again
until you exit Scan by short pressing the
SBx button again or by turning the radio
OFF and back ON.