User's Guide

PROGRAMMING
FEATURES
English
51
CPS and Cloning Cables (Optionals)
•
CPS Cable
Both CPS and Cloning cables are made to
work either with RM Series radios or RDX
series. Cloning cable also can work with a
mix of RDX and RM radios.
The CPS cable is made to program RM
series radio when the switch is in either
"Flash" or "CPS" position. If you want to
use the CPS cable to program a RDX
radio, make sure the switch is in "CPS"
position and attach a USB converter
provided as part of the CPS cable kit.
•
Cloning cable allows you to clone:
- RM Series, make sure the switch is in
"Cloning" position.
- RDX radios, make sure the switch is in
either "Cloning" or "Legacy" position there is
one USB converter attached on each end.
- RM and RDX radios, make sure the switch
is in "Legacy" position and use a USB
converter to connect to the RDX SUC.
Cloning cable kit provides 1 USB converter.
•
Cloning Cable
Micro-to-Mini USB Convertor
USB Converter