User's Guide

PROGRAMMING
FEATURES
English
50
•
Wait for 3 seconds before releasing the
buttons until a distinctive audible tone is
heard and ‘Cloning’ is announced.
3.
Place the Source radio in the source pocket
that pairs with the target pocket you chose in
step 1. Short press SB1 on Source radio.
4.
5.
Once you have completed the cloning
process, turn the radios OFF and ON to exit
the ‘cloning’ mode.
•
If cloning fails please refer to “What To Do
if Cloning Fails” on page 54.
When ordering the MUC, please
refer to P/N PMLN6384A.
•
Paired Target radios and Source radios must
be of the same band type in order for the
cloning to run successfully.
•
MUC pockets numbers should be read from
left to right with the Motorola logo facing front.
After cloning is completed, the Source radio
will announce either ‘pass’ (cloning was
successful) or ‘fail’ (cloning process has
failed). If the Source radio is a display model,
it will either show ‘Pass’ or ‘Fail’ on the display
(a tone will be heard within 5 seconds).
Further details on how to clone radios are
explained in the Instructions Sheet provided
with the MUC.
Notes