User's Guide

PROGRAMMING
FEATURES
English
49
CLONING RADIOS
You can clone RM Series radio profiles from
one Source radio to a Target radio by using any
one of these 3 methods:
• Using a Multi Unit Charger (MUC - optional
accessory),
•
Two Single Unit Chargers (SUC) and a Radio-to-
Radio cloning cable (optional accessory),
•
the CPS (free software download) and CPS
programming cable ((optional accessory).
Cloning with a Multi Unit Charger (MUC)
To clone radios using the MUC, there must be
at least two radios:
• a Source radio (radio which profiles will be cloned
or copied from) and
• a Target radio (the radio which profile will be
cloned from the source radio.)
The Source radio has to be in Pocket 1 or 4
while the Target radio has to be in Pocket 2 or
5, matching in the MUCs pockets by pairs as
follows:
• 1 and 2 or,
•
4 and 5
When cloning, the MUC does not need to be
plugged into a power source, but ALL radios
require charged batteries.
1. Turn ON the Target radio and place it into one of
the MUC Target Pockets
2.
n  the Source radio  ower  the radio following
the sequence below:
•
Hold the PTT button and SB2 for 3 to 5
seconds simultaneously while power up
the radio.