User's Guide

PROGRAMMING
FEATURES
English
47
Bandwidth Select (Only Canada models)
All US models are compliants with the
narrowbandwith FCC regulation.
Default setting for Bandwidth Select depends
on the specific frequency and channel. Some
frequencies have selectable channel spacing,
which must match with other radios for
optimum audio quality. For details, refer to
Frequency and Code Charts section.
Time-Out Timer
This timer sets the amount of time that the
radio can continuously transmit before
transmission is automatically terminated. The
default setting is 60 seconds and can be
changed using the CPS.
Power Select
Power Select allows you to select between
high and low transmission power per channel.
The power levels for RM Series toggle
between 2W and 1W.
Call Tones
Call Tones feature allows you to transmit an
audible tone to other radios on the same
channel and alerting them that you are about
to talk or alerting them
without speaking. The call tones feature must
be programmed to SB1 or SB2 and 1 of 3 pre-
recorded tones selected
Scramble
The Scramble feature makes transmissions
sound garbled to anyone listening without the
same code. Scramble default value is OFF.
The Scramble feature should be programmed
to SB1 or SB2, If the scramble code need to
be changed during radio's normal operation.
Reverse Burst
Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180 or 240 to
be compatible with other radios. Default 180.
Notes:
The features described are just some of the
features CPS has. There are many more capabilities
that this software offers. For more information refer
to the HELP file in the CPS.