User's Guide

PROGRAMMING
FEATURES
English
42
•
Short press the PTT button to enter Frequency
Programming Selection Mode. Radio will
announce current value ‘2’
•
Press SB1 button eleven times to scroll up the
frequency list and you will hear frequency "13"
Long press the PTT button to exit
Programming Mode or turn radio OFF.
Example of Programming a Code
Assuming current code value is set to factory
default ‘001’, and you want to change it to
CTCSS/DPL Code = 103 follow the sequence
below:
• Enter into Advanced Configuration Mode
•
Short press the PTT button twice and you will
hear "Code #" (Entering CTCSS/DPL
Programming Selection Mode).
•
Press and hold SB1 or SB2 will cause the radio
to increment by 10's - 10, 20, 30 ... 100, 110.
Will not hear 103. Need to release SB1 or SB2,
then slowly press/release SB1 or SB2 until the
user reaches the desired code, in this case "103"
Long press the PTT button. LED Indicator will
show a green heartbeat to indicate
'Programming'/'Idle' state. Long press the PTT
button to exit Programming Mode or turn radio
OFF.
•
•
•
•
Long press the PTT button. LED Indicator will
show a heartbeat to indicate 'Idle' state.