User's Guide

GETTING STARTED
English
32
Setting VOX Sensitivity
The sensitivity of the radio's accessory or
microphone can be adjusted to suit different
operating environments. VOX sensitivity can
be programmed via the CPS.
Default value is OFF. If you want to use the
VOX feature, VOX level should be set at a
value different from OFF.
• 1 = High audio input levels will trigger the Tx
• 2 = Medium sensitivity
•
3 = Low audio input levels will trigger the Tx
Microphone Gain
The sensitivity of the microphone can be
adjusted to fit different users or operating
environments.
This feature can be adjusted only through the
CPS. Microphone default setting is set to 2 =
Medium Gain.
Hands Free without Accessories (iVOX)
•
Enable iVOX by pressing the PTT
button while turning the radio ON
.
•
iVOX operation can be temporarily
disabled by pressing the PTT button.
Note
•
There is a short delay between when you
start talking and when the radio transmits.