User's Manual
Table Of Contents
- Product Safety and RF Exposure Compliance
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Contents
- Safety
- General Radio Operation
- Notations Used in This Manual
- XTS 2500 Model III Radio
- Physical Features of the XTS 2500 Model III Radio
- Programmable Features
- Display
- Backlight
- Status Symbols
- Menu Entry (Softkey)
- Menu Select Buttons
- Home Button (h)
- App Button (@)
- 4-Way Navigation Button (o)
- Keypad
- LED Indicators
- Alert Tones
- Standard Accessories
- Universal Connector Cover
- Remote Speaker Microphone Adapter
- Radio On and Off
- Zones and Channels
- Receive / Transmit
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Options
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Edit a Call, Page, or Phone List Number
- Edit a Call, Page, or Phone List Name
- Scan
- Telephone Calls (Trunking Only)
- Private Calls (Trunking Only)
- Call Alert Paging
- Conventional Talkgroup Calls (Conventional Operation Only)
- Repeater or Direct Operation
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
ASTRO XTS 2500 Model III 71
Special Radio Features
Select Enable / Disable
The dispatcher can classify regrouped radios into either of two
categories: Select Enabled or Select Disabled.
• Select-enabled radios are free to change to any available channel,
including the dynamic-regrouping channel, once the user has
selected the dynamic-regrouping position.
• Select-disabled radios cannot change channels while dynamically
regrouped. The dispatcher has forced the radio to remain on the
dynamic-regrouping channel.
The Scan or Private Call feature cannot be selected while your radio
is Select Disabled.
2 If you hear one beep
- Press the PTT button to send
the reprogram request again
OR
- Press h to hang up and
return to the home display.
OR
• One beep
If you hear five beeps, the
reprogram request was
acknowledged by the dis-
patcher. Your radio returns to
the home display.
OR
• Five beeps
If the dispatcher does not
acknowledge the reprogram
request within six seconds, you
see NO ACKNOWLDG and hear a
low-pitched alert tone.
Try again or press h.
• An alert tone
NO ACKNOWLDG