User's Manual
Table Of Contents
- ASTRO XTS 5000 Digital Portable Radio Model III User Guide
- Quick Reference Card
- Contents
- General Radio Operation
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Operation
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Scan
- Telephone Calls (Trunking Only)
- Private Calls (Trunking Only)
- Selective Calls (ASTRO Conventional Only)
- Call Alert Paging
- Conventional Talkgroup Calls (Conventional Operation Only)
- Status Calls (ASTRO 25 Trunking Only)
- Repeater or Direct Operation
- Smart PTT (Conventional Only)
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
ASTRO Digital XTS 5000 Model III 53
Common Radio Features
Conventional Scan Only
Make a Dynamic Priority Change
While the radio is scanning, the dynamic priority change feature lets
you temporarily change any channel in a scan list (except the priority-
one channel) to the priority-two channel. The replaced priority-two
channel becomes a non-priority channel. This change remains in
effect until scan is turned off, then scanning reverts back to the
preprogrammed state.
1 When the radio is locked
onto the channel to be
designated as priority-two,
press the preprogrammed
Dynamic Priority button.
Note: The priority-one
channel cannot be
changed to priority-
two.
2 The radio continues scanning
the remaining channels in the
list. To resume scanning the
preprogrammed priority-two
channel, you must leave and
re-enter scan operation.