User's Manual
Table Of Contents
- ASTRO XTS 5000 Digital Portable Radio Model III User Guide
- Quick Reference Card
- Contents
- General Radio Operation
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Operation
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Scan
- Telephone Calls (Trunking Only)
- Private Calls (Trunking Only)
- Selective Calls (ASTRO Conventional Only)
- Call Alert Paging
- Conventional Talkgroup Calls (Conventional Operation Only)
- Status Calls (ASTRO 25 Trunking Only)
- Repeater or Direct Operation
- Smart PTT (Conventional Only)
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
ASTRO Digital XTS 5000 Model III 47
Common Radio Features
Use the Preprogrammed Scan List Programming Switch and the
Menu
8 Press h to exit scan list
programming and return to
the home display.
1 Move the Scan List
Programming switch to the
Programming position. You
see the first list member. p
(flashing) indicates the
programming mode.
2 Press V or U to find the
member you want to change.
3 Press D, E, or F
directly below SEL or DEL or
RCL.
SEL = add and/or change the priority of the currently displayed
channel in the scan list.
DEL = delete the currently displayed channel from the scan list.
RCL = view the next member of the scan list.
Note: The maximum number of members for a trunking priority
monitor scan list is 15; for a conventional scan list, 15; and
for a talkgroup scan list, 10.
4 To change the priority of the
currently displayed channel,
press D, E, or F
below SEL additional times to
see
T or S or S or no icon.
FIRE DISP NW p
SEL DEL RCL
SEL DEL RCL
T or S or S or no icon