User's Manual

Table Of Contents

Common Radio Features

4 Press D, E, or F

directly below SCAN. You see

the first list member.

p (flashing) indicates the

programming mode.

5 Press V or U to find the

member you want to change.

6 Press D, E, or F

directly below SEL or DEL or

RCL.

SEL = add and/or change the priority of the currently displayed

channel in the scan list.

DEL = delete the currently displayed channel from the scan list.

RCL = view the next member of the scan list.

Note: The maximum number of members for a trunking priority

monitor scan list is 15; for a conventional scan list, 15; and

for a talkgroup scan list, 10.

7 To change the priority of the

currently displayed channel,

press D, E, or F

below SEL additional times to

see

T or S or S or no icon.

T = this channel is in the scan list as a non-priority channel.

S = this channel is in the scan list as the priority 2 channel.

S (dot flashing) = this channel is in the scan list as the priority 1

channel. You will hear all traffic on the priority 1 channel,

regardless of traffic on non-priority channels.

no icon = this channel is deleted from the scan list.

Note: You cannot delete a priority channel from a scan list. In a

talkgroup scan list, priority cannot be assigned.

FIRE DISP NW p

SEL DEL RCL

T or S or S or no icon