Users Manual Part 2

eth0 0
10.1.253.1 link#1 UH 0
lo0 0
127.0.0.0/8 127.0.0.1 UR 0
lo0 0
127.0.0.1 127.0.0.1 UH 8
lo0 0
192.168.20.0/24 link#5 C 0
pvc1 0
192.168.20.16 link#1 UH 0
lo0 0
192.168.21.0/24 link#6 UC 0
pvc2 0
192.168.21.17 link#1 UH 0
lo0 0
192.168.23.0/24 link#2 UC 5
eth0 0
192.168.23.1 link#1 UH 0
lo0 0
192.168.23.42 00:0d:88:68:6e:c6 UHL 4
eth0 0
192.168.25.0/24 link#7 UC 0
bts 0
192.168.25.1 link#1 UH 0
lo0 0
192.168.51.20 192.168.21.17 UHs 74
pvc2 0
192.168.69.20 192.168.21.17
UHs 40706
pvc2 0
For more information, see TETRA BTS Service Software (TESS) User Guide.
13.1.3.3.5
X.21 Interface
If the Site Link interface had been configured to use X.21 interface, the information provided by the
status bsl command is as follows:
SC) status bsl
Primary Site Link
State:DOWN
Speed: 0 bps Rear port:X.21
HDLC Statistics:- ----Rx---- ----Tx----
Good frames : 0 0
Overruns | Under-
runs
: 0 0
C Line | I Line
lost
: 0 0
CRC/framing er-
rors
: 0
No buffers avail : 0
Buffer overflows : 0
6802800U74-AP
Chapter 13: MTS Troubleshooting
389