Users Manual Part 2

• Service of receiver multicoupler (RMC).
CAUTION:
The RMC is a relatively open mechanical design and ESD protection is critical when
servicing this module. In case of field repair, first connect the cable to the Duplexer or
Preselector, then connect to the RMC. NEVER do this the other way round.
NEVER connect or disconnect the cable that connects the Duplexer and Preselector RX
outputs to the inputs of the RMC without using a correctly earthed ESD wrist strap.
Figure 213: MTS LiTE ESD Strap Connection
6802800U74-AP
Appendix C: Static Precautions and ESD Strap
493