Users Manual Part 2

Receiver Specification Value or Range
population mean: -120.0 dBm(-119.5
dBm 800 MHz)
spec limit: -117.5 dBm
Sensitivity (normal conditions, faded, TU50, 4% BER):
population mean : -113.5 dBm(-113.5
dBm 800 MHz)
spec limit: -111.0 dBm
Degradation (extreme conditions, static and faded) 3 dB
Nominal Error Rate (unprotected T1):
Static, -85 to -40 dBm: 0.01%
Static -40 to -20 dBm: 0.1%
TU50, -84 to -40 dBm: 0.4%
Maximum On-channel Desired Power Level -20 dBm
Co-channel Interference (19 dB C/I, faded, unprotected T1): TU50 2.0%
Adjacent Channel Interference (faded, unprotected T1, normal condi-
tions, 45 dB C/I (40 dB C/I for 800 MHz), at -103 dBm): TU50
2.0%
Adjacent Channel Interference (faded, unprotected T1, extreme condi-
tions, 35 dB C/I (30 dB C/I for 800 MHz)), at -97 dBm): TU50
2.0%
Blocking (static, normal conditions, 4% BER):
50 - 100 kHz -40 dBm
100 - 200 kHz -35 dBm
200 - 500 kHz -30 dBm
>500 kHz -25 dBm
Spurious Responses (normal conditions) 6 max.
1st Image 70 dB
1/2 IF 70 dB
2nd Image 70 dB
1/2 2nd IF 70 dB
Intermodulation Response Rejection: Normal conditions 65 dB
Table 124: Receiver Specifications – TEDS
Receiver Specification Value or Range
Degradation (extreme conditions, static and faded) 3 dB
Maximum On-channel Desired Power Level -30 dBm
Co-channel Interference (19dB C/I, faded, 16QAM, rate=1/2) TU50: 10.0%
Adjacent Channel Interference (static, 64QAM, 50kHz, 30dB C/I at
-97dBm, rate = 1/1) Applicable for both normal and extreme conditions.
3.0%
Blocking 25kHz TEDS (static, normal conditions, 3% BER):
6802800U74-AP
Chapter 14: Technical Specifications
436