Users Manual Part 1

Figure 144: MTS 2 Duplexer
NOTICE: Unused RX outputs should be terminated.
The duplex spacing between a transmit frequency and the corresponding receive frequency is 10 MHz,
with the transmit frequency highest. This leaves a 5 MHz spacing between the lowest possible transmit
frequency and the highest possible receive frequency.
For MTS 2 260 MHz, the duplex spacing between a transmit frequency and the corresponding receive
frequency is 9 MHz, and leaves a 3 MHz spacing between the lowest possible transmit frequency and
the highest possible receive frequency.
For 800 MHz, the duplex spacing between a transmit frequency and the corresponding receive
frequency is 45 MHz, and leaves a 19 MHz spacing between the lowest possible transmit frequency
and the highest possible receive frequency in each duplexer.
For 900 MHz, the duplex spacing between a transmit frequency and the corresponding receive
frequency is 15 MHz, and leaves a 10 MHz spacing between the lowest possible transmit frequency
and the highest possible receive frequency.
The MTS LiTE/MTS 2 Duplexer has 2 RX outputs and can handle a maximum power of 60 watts.
6802800U74-AP
Chapter 7: Radio Frequency Distribution System
285