Users Manual Part 1

Figure 142: MTS LiTE / MTS 2 Preselector
NOTICE: Unused RX outputs should be terminated.
The MTS LiTE/MTS 2 Preselector only has two RX outputs and no expansion output. In MTS
LiTE/MTS 2 the Preselector has an integrated high performance low noise amplifier (LNA). The supply
voltage for the LNA is supplied through the RX out connected to the Base Radios. The Preselector has
two outlets for two Base Radios. The antenna connectors are DIN 7–16, the receive side is connected
with QMA connectors. See the block schematic of the MTS LiTE/MTS 2 Preselector in the following
figure.
6802800U74-AP
Chapter 7: Radio Frequency Distribution System
281