Users Manual Part 1

6.5.1
Base Radio Startup Sequence
Verify the following LED conditions on the base radio controller according to the following table.
Table 76: Base Radio LEDs: Normal Startup Sequence
Status Tx
(Trans-
mit)
Alar
m
Description
off off off No power / initial
LED test (flashing multicolor)
off off Red Booting
Amber off Red Waiting for SWDL this is where the BR will wait if no Site Con-
troller is present.
Green off Red BRC main application is running
Green off off No active alarms
Green Green off BR is keyed
Table 77: Base Radio LEDs: Hardware Failure
Sta-
tus
Tx
(Trans-
mit)
Alar
m
Description
off off off No power / initial
LED test (flashing multicolor)
off off Red Booting
Am-
ber
off Red Waiting for SWDL this is where the BR will wait if no Site Con-
troller is present.
Gree
n
off Red BRC main application is running but an alarm is preventing
the BRC from keying
6802800U74-AP
Chapter 6: Configuration and Testing
252