Users Manual Part 1

RJ45 PIN
D-SUB 9 Female
PIN
Description
2 (NC)
3 (NC)
4 3 RX
5 5 GND
6 (NC)
7 2 TX
8 5 GND
The Service Connector Box (0166502N05) is used for connecting a PC to the Base Radio. It has
additional functionality for measuring receiver sensitivity, see Figure 132: Service Connector Box
Pinout on page 246.
Figure 131: Service Connector Box
NOTICE: This cable is necessary for BR measurement. To only access the serial console, you
can use the basic service cable (see Figure 130: Basic Service Cable on page 244).
6802800U74-AP
Chapter 6: Configuration and Testing
245