Service Manual

18
6802800U74-AN
Chapter 3: Site Preparation
Figure 6: Suggested MTS LiTE Site Layout
minimum
600mm
Service Area
minimum
800mm
rack
MTS
LiTE
rack
427mm
minimum 45mm
3.2.2
MTS 2 Cabinet Considerations
The equipment cabinet dimensions are: 443 mm (width)/472 mm (depth)/605 mm (height) as shown in
the following figure.
Figure 7: MTS 2 Cabinet Dimensions
The equipment cabinet may be installed against adjacent equipment, however the following minimal
distances must be retained:
• 45 mm on both sides of the cabinet
• 800 mm of free space in front of the cabinet
The cabinet front door is removable. Figure 8: Suggested MTS 2 Site Layout on page 66 shows the
cabinet layout within a suggested site. Additional free space is recommended at the front of the cabinet
to allow the service personnel to access the equipment easily.
HVAC
HVAC