Manualshelf

Service Manual

ManualsBrandsMotorola Solutions ManualsElectronicsNon Broadcast Transmitter
101102103104105106107108109110
10
6
6802800U74-AN
Chapter 4: Hardware Installation
Figure 41: 100–240 VAC Connections on the Expansion Cabinet Junction Panel
4.5.3.4
Connecting 100–240 VAC Power Source to Equipment Cabinet
WARNING: Make sure all power to the Power Supply Unit is switched off to prevent accidental
contact with high energy and injury to personnel.
Procedure:
1 Connect the AC cable to the AC socket (type IEC C15 line socket, Motorola P/N 3166502A01),
which is provided with the MTS.
2 Insert the AC socket into the AC input connector on the MTS and fix with the retaining clip as
shown in Figure 42: AC Socket (IEC Connector) on page 106. This fixture will only work with the
supplied IEC connector.
Figure 42: AC Socket (IEC Connector)