User's Manual

• Locate the DC supply source within the same premises as the equipment.
• Do not install switching or disconnecting devices in the earthed circuit conductor between the DC source and the
point of connection of the earthing electrode conductor.
Disconnect Device Permanently Connected
Incorporate a readily accessible disconnect device (circuit breaker or switch) in the building installation wiring.
Multiple Power Source
This product has multiple power sources. If service requires the removal of a power source, disconnect all inputs (AC
and DC powers) to remove power completely to the equipment before servicing.
Connection to Primary Power
For supply connections, use wires suitable for at least 75 °C.
Replaceable Batteries
Warning: Risk of Explosion if you replace the battery with an incorrect type. Dispose of used batteries
according to the instructions.
Maintenance Requiring Two People
Identify maintenance actions that require two people to perform the repair. Two people are required when:
• A repair has the risk of injury that would require one person to perform first aid or call for emergency support. An
example is work around high-voltage sources. If an accident occurs to one person, another person may be required
to remove power and call for emergency aid.
• Heavy lifting is involved. Use the National Institute of Occupational Safety and Health (NIOSH) lifting equation
to determine whether one or two persons are required to lift a system component when it must be removed and
replaced in its rack.
Equipment Racks
Lift equipment racks without the use of lifting equipment only when sufficient personnel are available to ensure that
regulations covering health and safety are not breached. Use an appropriately powered mechanical lifting apparatus
for moving and lifting the equipment racks. In addition, comply with any local regulations that govern the use of
lifting equipment.
For installation of the cabinet version of the GTR 8000 Base Radio, see Cabinet Version of the GTR 8000 Base Radio
on page 96.
Warning: Crush Hazard could result in death, personal injury, or equipment damage. Equipment racks can
weigh up to 360 kg (800 lb). See the following instructions for proper lifting procedures.
General Installation Standards and Guidelines
This section provides guidelines to ensure a quality installation. Review these guidelines before unpacking and
installing the system. Additionally, review the installation information in the Standards and Guidelines for
Communication Sites manual for more details, including:
88 | GTR 8000 Base Radio Installation
Send Feedback | November 2013 | 6871024P71-A
Applicant: Motorola Solutions
Equipment Type: ABZ89FC5810B / 109AB-5810B
Exhibit D (Permissive Change)